HAVE ANY QUESTIONS OR GET A QUOTE? CLICK HERE
Mon - Fri: 8:30 - 17:30
Sat-Sun Closed
88453283, 87712558
Telephone
sales@maxcoretech.com
Email
Fire detection systems are designed to discover fires early in their development when time will still be available for the safe evacuation of occupants. Early detection also plays a significant role in protecting the safety of emergency response personnel. Property loss can be reduced and downtime for the operation minimized through early detection because control efforts are started while the fire is still small. Most alarm systems provide information to emergency responders on the location of the fire, speeding the process of fire control.
Conventional Fire Alarm System
Specification
- 230V AC 50/60 Hz
- 24V DC / Lead-Acid (Non-Spillable) Battery
- E.O.L RESISTOR 10 KΩ
- EXTERNAL CIRCUIT RESISTANCE To-and -fro below 50 Ω
- No. F BELLS 1.2 times of panel circuits
- MAIN AUDIO Single-tone buzzer, above 85 dB
- CURRENT VOLTAGE 24V DC operation voltage, below 5V 32mA
- CHARGING CURRENT26V DC, under 450mA, Trickle Charge
- DETECTORS No limit of R.O.R or Fixed Temp. Heat Detector can be installed; Each circuit can connect to a maximum of 20 smoke detectors (standby current for detector: 24V DC 25 μA below).
- No. OF INDICATORS 1.2 times of panels circuits (LED indicator)
- CASE MATERIAL 1.2mm~2.0mm Steel plate with powder coating
- REPORT CONTACT No voltage N.O. contact
- Capacity 250V AC 7A × 2 sets
Specification
- Dual LEDs 360-degree visibility. Bi-color LEDs, stand-by status: Green; Alarm status: Red
- With the photoelectric sensing principle, this kind of detector is activated more quickly, accurately and reliably, and there are no false alarm due to chemicals, exhaust gas, wind and exterior light
- Detector has passed EMC test, which greatly eliminates false alarms caused by interference from nearb sources
Specification
- The sensitive of fixed temperature heat detector part is stabilized performance, long-term durability and least malfunction are ensured by employing a bimetal mechanism (certificate by UL)
- Mechanical operating principle ensures the long-term durability and the least malfunction
- The exhaust valve of rate of rise heat detector part uses optical fiber glass capillary tubing that is heat-resistant and moisture-proof to avoid false alarms
Specification
- 240V AC 50/60 Hz ± 10%
- 24V DC / Lead-Acid (Non-Spillable) Battery
- E.O.L RESISTOR 10 KΩ
- To-and -fro below 50 Ω
- 1 time of panel circuits
- 26V DC below 450mA, Trickle Charging
- 24V DC operation voltage, below 5V 32mA
- 26.4V DC, under 450mA, Trickle Charge
- No limit of R.O.R or Fixed Temp. Heat Detector can be installed; Each circuit can connect to a maximum of 20 smoke detectors (standby current for detector: 24V DC 25 μA below).
- 1 time of panels circuits
- REPORT CONTACT No voltage N.O. contact
- Capacity 250V AC 7A × 2 sets
Specification
- Multi-purpose Design: when there is smoke or heat during pre-fire period, field situation will vary due to different environments. This combination design is to ensure that the pre-fire confirmation will not be affected by varying environments
- This detector has passed strict quality control and repetitive testing, hence its quality is stable and highly reliable
Specification
- Dual LEDs for 360-degree visibility
- Mechanical operating principles ensure the long-term durability and the least malfunction
- Self-restoring function ensures the elements repeatedly use
- Electrical contacts with Sliver-palladium alloy to conduct electricity excellently
- The exhaust valve of R.O.R Heat Detector part uses optical fiber glass capillary tube that's heat-resistant and moisture proof to avoid false alarms
Specification
- 240V AC 50/60 Hz ± 10%
- 24V DC / Lead-Acid (Non-Spillable) Battery
- E.O.L RESISTOR 10 KΩ
- To-and -fro below 50 Ω
- 1 time of panel circuits
- 26V DC below 450mA, Trickle Charging
- 24V DC operation voltage, below 5V 32mA
- 26.4V DC, under 450mA, Trickle Charge
- No limit of R.O.R or Fixed Temp. Heat Detector can be installed; Each circuit can connect to a maximum of 20 smoke detectors (standby current for detector: 24V DC 25 μA below).
- 1 time of panels circuits
- REPORT CONTACT No voltage N.O. contact
- Capacity 250V AC 7A × 2 sets
Specification
- Reflective Beam Detector is a reflective infrared beam smoke detector, which must be used together with reflectors. The number of reflector(s) to be used (1 to 4) depends on the distance of coverage from the detector
- Our feature "built-in laser beam" is to make alignment of mirror and detector easier and more convenient when mounting this device
Specification
- 2 Types of Gas Leak Detecting: Can detect LPG (liquefied petroleum gas) and LNG (natural gas and methane)
- 2 Types of Warning Messages: Both human voice message and built-in buzzer sound will warn you loudly when alarming
- 2 Functions of Auto-testing: Automatically detect sensor-failure and easy self-test button
- 2 Ways of Usage: Standalone type for household or wiring to control panel for monitoring system
- 3 Colors of Indicating Lights: Easy to read and can immediately tell different situations of Alarm/Fault/Normal
- High Sensitivity: Smart combustible gas detector with built-in microprocessor control parts
Addressable Fire Alarm System
Specification
- Two-wire communication
- 7' color LCD display with easy operation interface
- Equipped with self-simulation testing and warning functions
- Freely mix addressable modules and addressable detectors. Adjustable to any kind of building projects.
- USB port: easily upload/download program
- Multi-function: Networking, Linkage, Graphic system, Central monitoring and controlling system
Specification
- Two-wire communication technology
- Stable communication, noise/ interference resistant
- Self-test function
- Three-color LED indicator: monitoring, alarm, broken circuit
- CM-RD-02 is able to connect with convention detectors
CM-RP-07
Addressable Fire Alarm Annunciator
Specification
- Addressable Fire Alarm Annunciator
Specification
- Two-wire communication
- Two types only: built-in input or inout/output relay can apply for all devices
- Stable communications, noise/interference resistant
- Monitoring loops of addressable module do not need voltage for connecting with conventional detectors
- Three-color LED indicator: monitoring, alarm, broken circuit
- Quick-install base design for improvement of installation efficiency
Fire Alarm Accessories
CM-FP3
Fire Manual Call Point
Specification
- Reusable: No glass to break. No consumables. Durable plastic push cover is reusable
- Easy auto-reset: By pushing reset button to return to normal working condition
- Phone jack function: For stable communication in any urgent time
CM-999-360
Emergency Exit Light
Specification
- 110V/220V 60Hz
- NI-MH/NI-CD3.6V 500mAh
- 48hrs Emergency Duration:120Mins
- 2.4/2.8W
- Aluminum Alloy Case, high clarity panel
- Hangine/Ceiling/Wall
CM-FB6
Alaerm Bell 6"
Specification
- The way of motor-driven is taken at the low consumption of current to reduce the load for power output from receiver terminal
- This design of exceptional structure is sturdy and durable. The bell even can ring to last 40 hours without decline of the performance and structure
CM-240S
Voice & SMS GSM Communicator
Specification
- 8 Built-in alarm loops: 8 different zones for setting recipients separately.
- 8 Sets for both voice and SMS messages.
- 64 SMS messages recipients and 40 voice messages recipients for maximum.
- 3 Kinds of GSM signal: 2G, 3G and 4G are available.
- Wireless connection: Difficult to be tampered or destroyed.
- Easy to edit messages & recipients with free software.
- Multipurpose: Fire alarm system, Security system, Temperature control system and Remote monitoring system…etc
CM-PBL
Fire Alarm Complex
Specification
- Indication lamp, alarm bell and fire manual station
- CM-PBL1 Surface mounting
- CM-PBL2 Recess mounting
- 1mm powder coating iron plate
- Creamy White
UEL-3W
Emergency Light
Specification
- Power: 3Watts
- Dimension: 310*140*100mm
- Voltage Range: AC100-240V